PDA

View Full Version : Skimmer help



wolfinlv
10-06-2011, 09:46 AM
Ok here's my problem... skimmer wasn't working so took pump out to clean and found that the porcelain shaft of the impeller is broken. I've been to two places in town looking for either a replacement shaft or a replacement impeller or replacement pump I don't care but I need the dang thang working. It's a coralife I think it's the 220 coralife frankly at this point I'm willing to buy a new skimmer but it has to be HOB. Any Ideas or help would be greatly appreciated. I have atlantis calling their suppliers to see if they can get me the impeller but from what I saw online they don't come with the shaft...

five O
10-06-2011, 10:08 AM
You can buy the parts online. Most places are in California and the parts usually arrive the next day. If you must have a hang on the back, you might want to look for a CPR. You can find them online (eBay) used for dirt cheap. Heck I'm sure there is a few folks around here with them sitting in their garage. Might look on marine depot for the impeller. They have super fast shipping.

wolfinlv
10-06-2011, 10:33 AM
thanks 5Oh will check that out. CPR doesn't seem to have one for above 100gallon. My tank is 135

Troylee
10-06-2011, 01:59 PM
Here is a stainless one for $15 you will never have that problem again..

http://www.clearaquarium.com/site/products.aspx

wolfinlv
10-06-2011, 02:09 PM
Thanks Troy... have zapped them a note on their site.

five O
10-07-2011, 04:41 PM
That's an awesome find, I would jump all over that. Can't beat the price.

tbone74
10-07-2011, 06:27 PM
I got a cpr in the garage if you want to go that route